Download Samsung G532F U1 OS6.0.1 Scatter Firmware [Dead Boot Repair]

Samsung G532F U1 OS6.0.1 Scatter Firmware [Dead Boot Repair] 

This firmware is for a Samsung Galaxy Grand Prime Plus (model number G532F) with the U1 binary version and running on Android 6.0.1. The firmware is a scatter file, which is a type of firmware file that can be used to flash or update the device’s software. The firmware is specifically designed to fix a “dead boot” issue, which means it is intended to be used to revive a device that is not booting up properly. It’s important to make sure that this firmware is compatible with your device, and that you have the necessary tools and expertise to properly flash the firmware. It is recommended to do a backup of your data before proceeding with firmware flashing.

The Samsung Galaxy Grand Prime Plus (model number G532F) has a variety of features that make it a solid budget-friendly option. Here are some of the key features of the device:

  • 5-inch TFT display with a resolution of 540 x 960 pixels
  • Quad-core 1.4 GHz processor and 1.5GB of RAM
  • 8GB internal storage, expandable via microSD card
  • The 8-megapixel rear camera and 5-megapixel front-facing camera
  • 2600mAh removable battery
  • Runs on Android 6.0.1 Marshmallow
  • Dual-SIM support and 4G LTE connectivity
  • GPS, Wi-Fi, Bluetooth 4.0, and USB 2.0 for connectivity
  • Accelerometer and proximity sensors
  • 3.5mm audio jack and support for FM radio
  • Comes in Gold, Black, and White colors

It also has some pre-installed apps such as Samsung Kies, Samsung Smart Switch, Samsung Members, Samsung Health, Samsung Game Launcher, and Samsung Max.

Download Link:


Flashing firmware to a Samsung Galaxy Grand Prime Plus (model number G532F) is a complex process that should only be done by an experienced user. It is also very important to note that flashing firmware can potentially brick your device, or render it inoperable, so it is important to proceed with caution and make sure you have a backup of all your data before proceeding. That being said, here is a general overview of the process:

  1. Download the firmware for your specific device and version. Make sure it’s the correct firmware for your device.
  2. Extract the firmware files and note the location of the scatter file.
  3. Download and install the appropriate USB drivers for your device on your computer.
  4. Download and install a flashing tool such as SP Flash Tool.
  5. Open the flashing tool and load the scatter file from the firmware folder.
  6. Connect your device to your computer using a USB cable. Make sure the device is in firmware download mode (usually achieved by holding down the power button, volume down button, and home button simultaneously).
  7. Use the flashing tool to begin the firmware flashing process. The tool will typically show the progress of the flashing process and let you know when it is complete.
  8. Once the firmware is successfully flashed, disconnect your device from your computer and reboot it.
  9. The device should now be running the new firmware.

Leave a Comment